Skip to content
Bellator Cyber Guard
Small Business8 min readStandard

Remote Management Software Outage Response Checklist

By Bellator Cyber Guard Security Team
Remote Management Software Outage Response Checklist - remote management software outage response checklist

Remote monitoring and management (RMM) software is the tool your IT provider or in-house staff use to see, patch, and control every computer in your office from a single dashboard. When it goes down, you lose visibility into every endpoint at once, not just one broken laptop, which makes an RMM outage a different problem than a normal IT glitch. It can mask a real security incident, delay patching during an active threat, and in at least one well-documented case, the management platform itself was the attack path rather than the victim. RMM outages sit inside a broader pattern of cyber attacks on small businesses that work by exploiting the vendors a business trusts by default.

The checklist below covers what to do in the first hour of an outage, how to tell a vendor-side failure from a security incident on your own network, and what to ask before you sign or renew with an RMM or endpoint detection and response (EDR) provider, since outage handling is itself a fair test of a vendor's reliability.

Quick Answer

When your RMM software goes down, first check the vendor's status page to confirm whether the outage is on their side or yours, then switch to manual checks on your highest-risk systems while logging the timeline for compliance records. Do not act on remote troubleshooting instructions from anyone you didn't contact yourself, and treat the outage as a possible security incident until you can rule that out. If this is your second or third unexplained outage in a year, that is a sign to evaluate whether the vendor's update and communication practices are solid enough to trust with endpoint-level access, not just a scheduling nuisance.

What Actually Happened in Recent RMM and EDR Outages

Two incidents explain why this checklist matters. In July 2021, the REvil ransomware group exploited a vulnerability in Kaseya VSA, an RMM platform managed service providers (MSPs) use to manage client endpoints, according to a Cybersecurity and Infrastructure Security Agency (CISA) advisory on the attack. Kaseya said at the time that fewer than 1,500 downstream businesses were affected through their MSPs, a reminder that an RMM outage is sometimes the security incident, not a side effect of one. Pair this checklist with your broader data breach response plan so staff are not improvising both at once.

In July 2024, a flawed content update from CrowdStrike caused widespread crashes on Windows systems running its Falcon sensor, an EDR agent many businesses rely on. Microsoft said in a blog post on the outage that the update affected an estimated 8.5 million Windows devices worldwide, grounding flights and disrupting hospitals and banks. That incident was not malicious, but it showed that the same remote-update mechanism keeping your security tools current can take down every protected machine at once if a vendor pushes a bad update without staged rollout.

Two Outages, One Lesson

1,500
Downstream businesses Kaseya said were affected by the 2021 VSA ransomware attack, per CISA
8.5 million
Windows devices affected by the July 2024 CrowdStrike Falcon update, per Microsoft

During the Outage: What to Do in the First Hour

Your first job is to figure out whether the outage is on the vendor's side, on your own network, or an active security incident wearing an outage's clothes. Treat it as the third option until you can rule it out.

Outage Response Checklist

  • Check the vendor's public status page before assuming your own network is broken
  • Confirm whether the outage affects monitoring only, remote access only, or both, since the response differs
  • Switch to manual checks on your highest-risk systems: file servers, tax or billing software, patient record systems, point-of-sale terminals
  • Tell staff to report anything unusual directly (slow systems, unexpected pop-ups, locked files) rather than waiting for an alert that may not fire
  • Do not run any troubleshooting script, remote session, or fix sent by someone claiming to be vendor support unless you initiated the contact through a verified number
  • Log the start time, what you observed, and every action taken, since the FTC Safeguards Rule and most cyber insurance policies expect an incident timeline

Before the Next Outage: Build In a Fallback

An RMM or EDR outage is only a crisis if it is also your only way of knowing what is happening on your network. If your monitoring, remote access, and security alerts all run through one vendor's cloud console with no secondary path, a single vendor-side failure leaves you blind across every endpoint at once. The fix is not a second full tool stack, it is a documented fallback: who gets called, how you check systems manually, and what counts as "the outage is over" before you trust the dashboard again. Covering this in staff security awareness training means people know how to report anomalies by hand, not just wait for a dashboard that might not be working.

Does Your RMM Setup Create a Single Point of Failure?

Tap the ones that sound like you.

Tap every statement that applies to you.

What to Ask a Vendor Before (and After) an Outage

Outage handling is a legitimate test of a vendor, not an excuse to skip the evaluation. Software-only RMM tools are typically licensed per endpoint per month, and that license fee covers the dashboard and agent, not a person watching it or responding when something breaks. Before you sign or renew, ask these questions and get the answers in writing:

  • What was your platform's longest outage in the past 12 months, and how did you notify customers?
  • Do you stage agent and software updates to a small percentage of endpoints before a full rollout?
  • If your console goes down, can my team still see the security status of critical endpoints another way?
  • What is your documented recovery time objective for the management platform itself, not just for my data?
  • During a declared outage, who answers the phone, and what is the response time commitment?
  • Is remote monitoring bundled with endpoint detection and response, or will I be managing separate consoles and separate outages from two vendors?

That last question matters more than it looks. Running one tool for monitoring and a different tool for detection and response doubles the number of vendor outages you're exposed to, and doubles the places an alert can get lost between systems. If you want a breakdown of vendors pricing EDR on a flat per-endpoint basis, see which EDR providers offer flat monthly pricing for SMBs, or for a broader cost viewXDR pricing comparison for small businesses in the United States. Reviewing your network security equipment for remote workers alongside your monitoring contract, rather than as separate purchases, closes that gap.

Software License vs. Managed Service: What You're Actually Buying

Bellator Cyber Guard runs Bellator Core, which bundles managed EDR, remote monitoring, and Ransomware Rollback® into one subscription at $33 per computer per month, so monitoring and ransomware remediation run through one team instead of several. For lighter coverageBellator Shield covers managed EDR alone at $19 per computer per month. Compare the two directly on the protection plans page before deciding which scope fits your practice.

Software-Only License vs. Bundled Managed Service

What's included

Software-only RMM/EDR license
Dashboard and agent only
Bellator Core (managed)
Managed EDR, remote monitoring, and Ransomware Rollback®

Who watches for alerts

Software-only RMM/EDR license
Your staff, if someone is assigned
Bellator Core (managed)
Bellator's monitoring team

Pricing model

Software-only RMM/EDR license
Per endpoint/month, support often extra
Bellator Core (managed)
$33 per computer/month, flat

Vendors involved

Software-only RMM/EDR license
Often two or more consoles
Bellator Core (managed)
One

Advantages of a Bundled Managed Service

  • One vendor to call during an outage instead of two or three
  • Ransomware response is built into the monitoring, not purchased separately after an incident
  • Flat per-endpoint pricing simplifies budgeting compared to licensing plus in-house labor costs

Considerations

  • Moving from an existing RMM or EDR stack takes a transition period to re-enroll endpoints
  • A single vendor outage still affects your whole fleet at once, so ask about their staging and rollout practices too
  • Managed service pricing is typically higher per endpoint than a bare software license, because it includes monitoring labor

Get Your Free Cybersecurity Evaluation

Talk through your current RMM and EDR setup, outage exposure, and whether a bundled service like Bellator Core fits your practice. No pressure.

Frequently Asked Questions

Usually not. Most RMM and EDR outages are availability problems on the vendor's infrastructure or a bad update, not a breach of your data. The 2021 Kaseya VSA incident is the exception that proves the rule worth checking for: confirm the cause before you assume either way, and document your reasoning either way.

If the vendor's status page confirms a known, widespread outage within the first 15 to 30 minutes, you can generally treat it as an availability issue and monitor. If there's no status page update, the outage is isolated to your environment, or it coincides with a published vulnerability affecting that product, treat it as a possible incident and start your data breach response plan.

The FTC Safeguards Rule requires covered financial institutions, including many tax and accounting practices, to maintain an incident response plan as part of their written information security plan (WISP). Vendor outage handling is a reasonable scenario to document inside that plan, though whether your specific plan needs it is a question for your compliance advisor or counsel. See our written information security plan guidance for what the plan generally covers.

RMM (remote monitoring and management) software gives IT staff visibility and remote control over endpoints for patching, deployment, and troubleshooting. EDR (endpoint detection and response) specifically watches for and responds to malicious activity on those same endpoints. Some vendors sell them separately; others, including Bellator Core, bundle both with ransomware remediation into one subscription.

Not automatically. One outage, clearly communicated and quickly resolved, is normal vendor behavior. A pattern of unexplained or poorly communicated outages, or a vendor that can't answer the staged-rollout and fallback-access questions above, is a legitimate reason to re-evaluate before your next renewal.

Share

Share on X
Share on LinkedIn
Share on Facebook
Send via Email
Copy URL
(800) 492-6076

See whether the service fits

Know what is protected, who responds, and what work stays with your team

Start with the outcome and scope. A good fit is clear about who it is for, what is covered, how implementation works, and what happens when the service detects a problem.

People also look for

Keep exploring Incident response & NIST

Build a response process that helps people detect, contain, recover, and improve when something goes wrong.